Want to connect your AirPods with your PS4 but don’t know how? Unfortunately, the console doesn’t natively support Bluetooth audio, syncing AirPods to it isn’t as easy as you’d expect. But don’t worry, because still, you can connect your AirPods to PS4 with the available third-party products. You can find these third-party products online easily.
If you simply try to sync your AirPods to the PS4, the console won’t detect the AirPods since it doesn’t support Bluetooth audio. On this part, third party receivers or dongles come into play. Now when you get to know this and if you are looking for an inexpensive option, we recommend the TP-Link USB Bluetooth Adapter, which is easily available on Amazon. One thing is important to keep in mind that, this dongle will keep only support audio. If you want to be able to talk and use your AirPods as a mic, we recommend the Gam3Gear USB receiver with an AUC plug. You can also get this one on Amazon.
It was all about how to connect AirPods to PS4; you can follow our recommendations or find your best one. Hence, if you have it and want to know the connection procedure so we should go ahead. We will teach you how you can connect your AirPods to PS4 with the help of a third-party dongle.
Pairing AirPods to the receiver
When you’ve got your receiver, plug it into the PS4. You can find in the dongle you have, it may have some sort of light on it to indicate it’s turned on. Check on PS4, there should be a sync button on it. Press it and open up your AirPods case (it will start the pairing process) and press the button on the back of it to get the two paired. You can check if your dongle has to flash light which indicates that it’s syncing, and it will stop after it’s properly synced.
Once you found AirPods and receiver are paired, go to Setting within your PS4, followed by Devices, and then the Audio Devices. Now, go to Input devices and make sure my devices it’s set to Headset Connected to ControllerOner. Check your output device be set to USB Headphones (USB Audio Device) and make sure that you set the output to headphone to all audio. Your AirPods will now be fully connected allowing you to listen and talk through your Apple AirPods while you game.
Use AirFly to Connect your AirPods with PS4
Arfly is a Bluetooth adapter from Twelve South that allows you to connect your AirPods to various devices-exercise equipment, airplanes in-flight TVs, and any other aux port found. It includes the auxiliary port on the underside of the PS4 Dualshock 4 controller. You can use AirFly Duo as well as the AirFly Pro, both operate the same. The plus point in using AirFly is it can also act as a receiver when used with your car’s stereo or other audio equipment.
How to use your AirPods with the PS4
Let’s see how you can connect your AirPods with the PS4 while using AirFly. This is much simple and you can do it by following below steps:
Step-1 Connect your AirFly to the headphone jack on your PS4. If you’re using AirFly Pro, make sure it is in transmit mode (TX) and hold the button for four seconds until the light flashes.
Step-2 Once you have done this, keeping the AirPods in the case and the lid open, press and hold the pairing button on the back of your AirPods charging case until the light on the front flashes white.
Step-3 You may wait to get a pair. Once they’ve connected, your AirPods status light will show green-or amber depending on battery life in the case and the AirFly will light up white.
Alternative Method to Connect your AirPods with PS4
I am sure you will definitely like this method because to proceed with this method you don’t need to buy something or have any Bluetooth adapter, you just need any PC with an “Audio” (Mic) jack and a television with any form of audio out (3.5mm, RCA, etc). In this method, we will teach you how you can connect your Airpods via PC or Tv and you don’t need to buy any other adapter. Read on
Connect the PS4 to TV with HDMI, (Standard connection no adapter needed). You can use the 3.5mm jack audio out jack (or RCA) on the back of the TV to connect to the audio on a PC. It’s usually the pink connector on a motherboard. Find the control panel>Hardware and Sound->Sound. Now select the recording tap and right-click on the microphone and select properties. Choose the Listen tab and check the box next to Listen to this device. Select is a default Playback device and apply.